THE POWDER COAT & ELECTROCOATING EXPERTS FOR OVER 30 YEARS
Powder coating application at Powder Cote II

Powder Coating

Powder coating is an advanced method of applying a decorative and protective finish to a wide range of materials and products. The powder used for the process is a mixture of finely ground particles of pigment and resin, which is sprayed onto a surface to be coated. The charged powder particles adhere to the electrically grounded surfaces until heated and fused into a smooth coating in a curing oven. The result is a uniform, durable, high-quality, and attractive finish.

Our state-of-the-art powder coating systems are capable of either a six stage iron or a six stage zinc phosphate pretreatment. Immediately following pretreatment, the components are dried prior to paint application. The parts are then powder coated, utilizing either manual or automatic spray equipment, with the appropriate powder finish. Finally, the product is cured according to the powder manufacturer’s specifications.

Powder coated surfaces are more resistant to scratching, chipping, fading, and wearing than other finishes. The color stays bright and vibrant longer. The color selection is virtually unlimited, offering high and low gloss, metallic, and clear finishes.

Uses & Specs

Powder coating contains no solvents, and releases virtually no VOCs into the atmosphere.

  • Our Mount Clemens Facility currently runs Four Powder Lines — Six Company-Wide (MI & TN)
  • Zinc & Iron Phosphate Capabilities
  • Processing Window
    • Length: 132”
    • Width: 36”
    • Height: 72”
  • 348/458 Overhead Conveyor
  • Henkel Pre-Treat Chemistry
Parts on the powder coating line at Powder Cote II’s Mount Clemens, Michigan facility

Powder Coating FAQs

What pretreatment do you use before powder coating?

Parts run through a 6-stage iron or zinc phosphate pretreatment with Henkel pre-treat chemistry, are dried, powder coated with manual or automatic spray equipment, and cured to the powder manufacturer's specifications.

What size parts can you powder coat?

Our powder lines carry a processing window of 132" long by 36" wide by 72" high on 348/458 overhead conveyors. The Mount Clemens facility runs four powder lines — six company-wide across Michigan and Tennessee.

Do you offer powder coating in both Michigan and Tennessee?

Yes — powder coating runs at both our Mount Clemens, Michigan campus and our Clinton, Tennessee plant.

Can powder coating be combined with e-coat?

Yes. An e-coat primer under a powder topcoat is a proven system for demanding parts, and we run both processes under one roof. See our comparison: e-coat vs powder coat.